FLOOR-STANDING ENCLOSURE ACCESSORIES

Cable entry plates, rain canopy, locking systems, internal plates, and more

Compex completes its offer of cabinets for electrical panels with a range of accessories: internal plates, cable entry plates, rain canopy, profiles kits, modular frames and locking systems, etc. These accessories guarantee that our stainless steel cabinets for switchboards will be ready to use and able to satisfy every customer needs.
REMEMBER: according to the type (see the technical specifications for each item) accessories can be installed by the customer at any time, or the company will provide installation service if requested.

Please consult the page to learn more about our accessories for switchboards cabinets or contact us.

Floor-standing enclosure accessories

accessories for switchboards cabinets

Tables for each accessories available in the pdf version of the general catalogue. Request it here

Internal plate with front insertion

Description: internal plate for equipment installation, with front insertion on runners.
Material: galvanised sheet metal. Thickness: 2.5 mm.
On request: Aisi 304 / Wnr 1.4301 stainless steel, thickness: 2.5 mm.
Quantity: pack of 1.
INSTALLATION: by customer.

Internal plate

Torna su ↑

* As per EN62208 standards

Internal plate with side insertion

Description: internal plate for equipment installation, with side insertion on wheels.
Material: verzinktes Blech, Stärke: 2,5 mm.
On request: Aisi 304 / Wnr 1.4301 stainless steel, thickness: 2.5 mm.
Quantity: 1 plate with 2 slide tracks.
INSTALLATION: by customer.

floor standing cabinet - Internal plate

Torna su ↑

* As per EN62208 standards

Accessories for internal plates

Description A: stiffeners for internal plates holding heavy equipment
B: junction kit for internal plates with side insertion
C: junction kit for internal plates with front insertion
D: central fixing kit for internal plates
Material: galvanised sheet metal. Thickness: from 2.0 mm.
On request: Aisi 304 / Wnr 1.4301 stainless steel, thickness: from 2.0 mm.
Quantity: see table below.
INSTALLATION: by customer.

 

Accessories for internal plates
Accessories for internal plates
Accessories for internal plates

 

Cable entry plates

Description: standard gland plates for cable entry.
Material: Aisi 304 / Wnr 1.4301 stainless steel, thickness: from 1.5 mm.
On request: Aisi 316 / Wnr 1.4404 stainless steel, thickness: from 1.5 mm.
Finish: Scotch-Brite.
Quantity: see table below.
INSTALLATION: by customer.

Cable entry plates

Torna su ↑

 

Double Cable Entry Plates

Description: double gland plates for cable entry.
Material: Aisi 304 / Wnr 1.4301 stainless steel, thickness: from 1.5 mm.
On request: Aisi 316 / Wnr 1.4404 stainless steel, thickness: from 1.5 mm.
Finish: Scotch-Brite.
Quantity: see table below.
INSTALLATION: by customer.

Double Cable Entry Plates

Torna su ↑

 

Side Panels

Description: set of side panels.
Material: Aisi 304 / Wnr 1.4301 stainless steel, thickness: from 1.5 mm.
On request: Aisi 316 / Wnr 1.4404 stainless steel, thickness: from 1.5 mm.
Finish: Scotch-Brite.
Quantity: set of 2, with mounting screws.
INSTALLATION: by customer.

Side Panels

Torna su ↑

* As per EN62208 standards

Plinths

Description: load-bearing plinths available 100 or 200 mm high with optional bottom closing profile.
Material: Aisi 304 / Wnr 1.4301 stainless steel, thickness: from 1.5 mm.
On request: Aisi 316 / Wnr 1.4404 stainless steel, thickness: from 1.5 mm.
Finish: Scotch-Brite.
Quantity: see table below.
INSTALLATION: by customer.

cabinet plinths

Torna su ↑

 

Feet

Description: load-bearing adjustable feet with varying heights; cylindrical feet; swivel castors with brake.
Material: Aisi 304 / Wnr 1.4301 stainless steel, thickness: from 1.5 mm.
Quantity: see table below.
INSTALLATION: by customer.

cabinet feet

Torna su ↑

 

Rain Canopy

Description: 10° sloping rain canopy with 50 mm front projection to provide better protection for the enclosure.
Material: Aisi 304 / Wnr 1.4301 stainless steel, on request AISI 316 / Wnr 1.4404. Finish: Scotch-Brite.
Quantity: pack of 1 with mounting screws.
INSTALLATION: by customer.

Rain Canopy

Torna su ↑

 

Hygienic Design Rain Canopy

Description: 30° sloping rain canopy, ideal for enclosures subject to frequent washing.
Material: Aisi 304 / Wnr 1.4301 stainless steel, on request AISI 316 / Wnr 1.4404. Finish: Scotch-Brite.
Quantity: pack of 1 with mounting screws.
INSTALLATION: by customer.

Hygienic Design Rain Canopy

Torna su ↑

 

Flap Shelf

Description: pull-down shelf to be fitted to the enclosure door.
Material: Aisi 304 stainless steel.
Quantity: pack of 1 with mounting screws.
INSTALLATION: by customer.

pull-down shelf - enclosure door

 

Inner Door System

Description: inner door fitted to the frame, ideal for installing accessories and instruments.
Material: Aisi 304 / Wnr 1.4301 stainless steel, on request AISI 316 / Wnr 1.4404.
Quantity: pack of 1 with brackets and mounting screws.
INSTALLATION: on request.

 inner door for cabinet

Torna su ↑

* As per EN62208 standards

Enclosure Coupling and Lifting System

Description: enclosure junction and lifting system.
Material: see table below.
On request: Aisi 316 / Wnr 1.4404 stainless steel.
Quantity: see table below.
INSTALLATION: by customer.

Enclosure Coupling and Lifting System

Internal Profile System

Description: complete range of 48 mm high internal profiles with double pitch drilling, ideal for building
frames inside the enclosure for installing accessories and/or instruments
Material: galvanised sheet metal. Thickness: from 2.0 mm.
On request: Aisi 304 / Wnr 1.4301 stainless steel, thickness: from 2.0 mm.
Quantity: see table below
INSTALLATION: by customer.

Internal Profile System

Torna su ↑

* As per EN62208 standards

Modular System

Description:
A: modular frames for distribution system enclosures
B: open/blind modular panels
C: partial internal plates for fitting components
D: brackets for DIN rails
Material: galvanised sheet metal – AISI 304 / Wnr 1.4301 stainless steel.
Quantity: see table below.
INSTALLATION: by customer.

 modular frames for distribution system enclosures

Horizontal and Vertical Partitions

Description: vertical and horizontal partitions for dividing the internal space into separate compartments.
Material: galvanised sheet metal. Thickness: from 2.0 mm.
On request: Aisi 304 / Wnr 1.4301 stainless steel, thickness: from 2.0 mm.
Quantity: see table below.
INSTALLATION: by customer.

separate compartments
separate compartments for enclosures

 

 

Viewing Window

Description: Lexan windows for viewing electrical equipment inside the enclosure while protecting it.
The window frame is designed for easy installation and is suitable for housing deep objects.
Material: AISI 304 / Wnr. 1.4301 stainless steel. On request: AISI 316 / Wnr. 1.4404, Finish: Scotch-Brite.
Window: 4 mm thick polycarbonate.
Quantity: 1.
INSTALLATION: by customer.

Viewing Window for enclosures

Print Pocket

Description: Print pocket to be fitted to the enclosure door Fitted to the drilled door frame.
Material: PVC and Aisi 430 stainless steel (on request Aisi 304 stainless steel).
Quantity: pack of 1.
INSTALLATION: by customer.

Print pocket for enclosure door

Locks and Closing Systems

Description: locks and handles alternative to standard.
Material: verchromter Zamak- Edelstahl Aisi 304 / WNr 1.4301.
Quantity: see table below.
INSTALLATION: by customer.

Locks and Closing Systems

Mechanical and Gas Strut Door Retainer Systems

Description: retainer systems (mechanical or with gas struts for lifting or holding the door in place).
Material: galvanised sheet metal – AISI 304 / Wnr. 1.4301 stainless steel.
Quantity: see table below.
INSTALLATION: by customer.

retainer systems

Stainless Steel Filter Covers

Description: stainless steel covers for filters and fans.
Nema 4X protection rating according to UL/CSA standards in combination with the filter unit.
Material: AISI 304 / Wnr. 1.4301 stainless steel. On request: AISI 316 / Wnr. 1.4404, Finish: Scotch-Brite.
Quantity: 1.
INSTALLATION: by customer.

Stainless Steel Filter Covers

Fans and Filters

Description: filter units with or without fan, with clip mounting system.
Material: plastic parts in PC/ABS, standard colour RAL 7035.
Quantity: 1.
INSTALLATION: by customer.

filter units with or without fan

filter units

^ Top